Chrysler 200 Lost Car Key Replacement – All the Information You Need to Get a New Chrysler 200 Key. Tips, Costs, Your Options, and More.
Call Us Now: 800-223-1453
In this article:
Chrysler 200 was introduced in 2011. This model has two versions and two types of keys.
Remote key fob: 2015 to 2017.
Transponder chip key: 2011 to 2014.
- Please keep in mind that while some keys or key fobs may look the same, they have different capabilities/frequencies/keyways. Therefore, having the right key or key fob is essential.
- Already have your key? Need information to guide you through programming your Chrysler 200 key fob or transponder key? Click here for more information.
Quick access or go to FAQ
Click on the type of key you had or your year model below to get the most accurate information:
Chrysler 200 w/Prox:
2015, 2016, 2017: (M3M-40821302)
Already have a remote key fob? Click HERE for programming information.
Chrysler 200 w/o Prox:
2011, 2012, 2013, 2014: (Y164-PT)
Already have a key? Click HERE for programming information.
Call Us 24/7: 800-223-1453
Q: I lost my Chrysler 200 car keys. I don’t have a spare, so need a replacement. How and where can I get a replacement key?
Generally speaking, you have three options:
- Call an automotive locksmith that offers a mobile service for Chrysler 200 cars. We can help you with that.
- Tow the car to the dealer.
- Order a key online and have the dealer or locksmith cut and program it for you (if necessary).
A word of caution: The type of key you need depends on the year and model of your Chrysler 200. Therefore, the options for getting a new key made and programmed depend on whether you need a remote, an intelligent fob, push to start button, a transponder, or a regular key.
A: For a more detailed explanation, including tips on SAVING TIME AND MONEY, please visit our blog post: How to get a replacement key.
Not ready to call for service just yet? Click here for some GREAT ideas on how to find lost car keys.
Q: Chrysler 200 key replacement near me – How to find a locksmith or dealer and what should you tell them?
First, make sure you have the exact year, make, and model, e.g., 2016 Chrysler 200 w/Prox.
In addition, write down the VIN (Vehicle Identification Number) of the car located on the left side of the dashboard near the mirror (Click here for more information). The VIN helps the locksmith or dealer verify the year, make, and model of the car and determine which key you had.
Also, keep in mind that many locksmiths offer mobile service and travel up to 30 miles radius from where their store is located. Therefore, depends on your location, it might be a good idea to expand your search and call for a few additional quotes, even if on the map, these locksmiths seems to be far from you.
Their distance as you see on the map, is their business address, not their physical and current location. All you have to make sure, is that they carry the right equipment to cut and program your Chrysler 200 key.
You can also try and call a few Chrysler dealers near your location, but remember that you will need to tow the car there.
Finally, make sure you can show ownership of the car by having the necessary documents – title, ID, insurance card, etc.
Q: Chrysler 200 key replacement cost – How much does it cost to replace a Chrysler 200 key without the original? What is the average price?
In short, replacing a Chrysler 200 key can cost between $220 to $400. The cost depends on a number of factors:
- The type of key you need
- The car’s year of manufacture
- Time of day & your location
- Where you get a key replacement (dealer, automotive locksmith, online, etc.)
- Availability of code to cut a new key
- Original ignition or not
The type of key you had and the year the car was manufactured are the most important factors for identifying if you need a chip, intelligent fob, “push to start”, remote, regular “non-transponder” key. The newer the car is, the better the security features the key has. On later models, you can therefore expect to pay more than $250 for a replacement key. Click here to see the model and type of key you had for a more accurate price and additional information.
the price depends on where you get a key replacement. Did your replacement key come from the dealer, or an automotive locksmith? Or did you get it online? Click here to get a more detailed explanation of how to get a replacement key.
The dealer usually charges about 10% to 15% less for the replacement key than a locksmith would charge. However, you will likely have to tow the car there to program the new key or remote. Therefore, the total price is usually higher.
consider that if you have a locksmith come out and make you a new key outside regular business hours, the price may increase.
If you have previously had your ignition cylinder replaced, which is quite common in older cars, this probably means that the code for the key may not be useful. In such cases, the key will have to be cut manually by a locksmith, or you will have to change the ignition again, and here the dealer can’t help.
For a more detailed explanation and GREAT TIPS on how to save money, please visit our blog post: Car keys replacement costs
Tips for Chrysler 200 key fob replacement – What to ask and verify before and after you get a new key fob:
Very often when people get a replacement key fob, there are certain things they forget to check and ask the dealer or locksmith.
We gathered here the most relevant information and tips to make sure you won’t face a problem down the road.
Make sure to get the key code of your Chrysler 200 key fob – Every key fob, has a unique code which locksmiths and dealers use to know the exact cuts to match your ignition, door and trunk cylinders.
Obviously, this code is different from one car to another. This key code costs money, and before the locksmith or dealer cut you a new key fob, they must pay to get the code from the Chrysler database, which may cost them up to $100. Make sure you write down this key code and keep it in a safe place. In case you lose your Chrysler 200 key fob again in the future, it will cost you less to get a replacement, and the process will be faster.
Verify they cut you the emergency key, and that it works on the doors cylinders and trunk – Every key fob comes with an emergency key attached to it. The emergency key can be used to access the car in case the battery is dead.
Sometimes, when locksmiths or dealers program a new replacement key fob, they forget to cut the emergency key as well.
Make sure they cut you the emergency key and that it works for each door and the trunk to avoid a future lockout situation. It should work smoothly, just like your house key. Don’t be lazy, check it on site.
know which battery your Chrysler 200 key fob has – These key fobs, like all key fobs, are battery operated. Make sure you know the type of battery you need and keep a spare one. (Chrysler 200 key fobs usually use CR-2032 battery).
Q: Can I get a Chrysler 200 key replacement by its VIN?
A: That depends on the year of manufacture of your car and the type of key you had.
The VIN gives dealers or automotive locksmiths the option of accessing the key code on file – i.e., to cut you a replacement key by code which makes the process fast and easy. There are however two things to consider:
- If your vehicle is older than 10 years, Chrysler dealers will no longer have its key code record, so an automotive locksmith will be your only option to get a replacement key.
- For vehicles equipped with a transponder system and/or a remote/intelligent key/fob key, the codes should be available. However, as coding is required, you will have to either tow the car to the dealer, or have an automotive locksmith come and code the key on site.
For more information, click here
Q: Chrysler 200 key programming – which keys can you program yourself? Which keys require a programming tool? & more
A: Chrysler has different types of keys. Some require programming, and some don’t. All transponder chip keys and/or smart key fobs need to be programmed. This process requires a special programming machine that only an automotive locksmith or the dealer has. There is no need to program non-transponder metal keys.
To make things simple, we divided all Chrysler keys into two categories:
- No programming needed (Non-transponder keys).
- Keys that need to be programmed (Transponder or remote keys). These keys required the expertise of an automotive locksmith or the dealer.
No programming needed:
Chrysler non-transponder keys are metal keys that have no chip in them, so no programming is needed.
Chrysler 200 has none of this key type – all Chrysler 200 keys have a chip and need to be programmed.
For Chrysler 200 keys that need to be programmed, you will need an automotive locksmith or the dealer:
These keys, also known as remote smart keys, intelligent keys or key fobs, and transponder keys, have a security chip. Programming is needed. Also, a special machine is needed to program them. An automotive locksmith or dealer should do it for you. This process must be followed for most models made after 1998.
Keyless entry information for the Chrysler 200:
For year models 2011 to 2017, there is a built-in keyless entry in the remote key fob and transponder chip key.
Chrysler 200 key fob battery – important information: How to replace, size, cost, and more.
Chrysler 200 model has different kinds of keys. If your model uses a key fob or a transponder key, here is some important information you should know about the battery.
There are 2 types of keys that are battery operated:
Key fob: (like in the picture below)
Watch a short video here: how to replace Chrysler key fob battery, type of battery and more: (Used for Chrysler, Dodge & Jeep)
Transponder chip key: (like in the following picture)
Watch a short video here: how to replace this transponder key battery, type of battery and more:
Things to remember when your Chrysler 200 key fob battery is dead:
First, even if the key fob’s battery is dead, you still can unlock and start your Chrysler 200. You can use the emergency key provided with the key fob to unlock the doors as shown below:
How to start Chrysler 200 with a dead key fob?
You can start your Chrysler 200 by pushing the “Start” button with your key fob. The car’s computer recognizes the chip inside the key fob and authorizes the process.
This way, you will be able to start your vehicle EVEN if the key fob battery is dead.
Chrysler 200 key battery information:
Chrysler 200 key fob and transponder key are battery operated. Every two years or so, or when the battery is low, you may need to change the key battery. Here is all the information you need.
The type of battery you need is a CR-2032. The average price for these batteries is about $5.
You can order one online here.
Also, you can find it at Home Depot, Walmart, AutoZone, etc.
Here is some general information about the Chrysler 200 key battery:
Type of battery: CR-2032 lithium
Size: Diameter – 20 mm, height – 3.2 mm
Finally, remember that your battery life depends on several factors such as usage, weather conditions, etc. To better protect your Chrysler 200 key and extend its battery life, it may be a good idea to have a key cover or a case. You can order one online here.
Call Us Now: 800-223-1453